How to add users to Incontrol2 Group

Created by Joey Janssen, Modified on Wed, 28 Feb at 7:27 PM by Joey Janssen

Introduction:

Incontrol2 is a cloud based device management, monitoring and reporting tool designed specifcally for Peplink devices. Any Peplink device can be registered in Incontrol2 if it has connection to a network source. Within Incontrol2 you will get advance administration tools, unprecedented device visibility and comprehensive reporting. 

In this article we are going to learn how to add new users to the Incontrol2 Group.

Note:
Adding users to the Incontrol2 Group allows them to see all device in the Group!

Step 1: Navigate to the InControl 2 login page at https://incontrol2.peplink.com.

Step 2: Enter your login credentials and click on Sign in to continue. Welcome to InContro2. this will look like the picture below:

Step 3: Open op your organization.

Step 4: Select the Group you want to change.

Step 5: Go to settings and select "Group Settings"

Step 6: Fill the details of the Peplink ID account that must be added and required role. Save at the bottom of the page.

After adding the user don't forget to save at the bottom of your screen!

Note:
This requires a Peplink ID account on the added email address.

Please let us know below if this article was helpful!

If you have any questions or remarks please let us know via support@frontierbv.com