How to add devices in Incontrol2

Created by Soukaina Rafiki, Modified on Tue, 17 May, 2022 at 2:14 PM by Joey Janssen



This option adds new devices into the group instance using the Peplink device’s serial number, tags can be added now however it may be necessary to add tags at a later stage as the network is planned.




Step 1
: Navigate to the InControl 2 login page at https://incontrol2.peplink.com. 



 




Step 2:  Enter your login credentials and click on Sign in to continue. Welcome to InContro2. Look picture below:


  


Step 3To add new devices, click  Settings > Add Devices.





Step 4On the Add Devices Into Groups page, choose a group from the Select Group drop-down menu.


 



Step 5Enter one or more serial numbers. 




Step 6Click the Next button. 




InControl2 will check to make sure each device is valid for use with the software,
and is not already in use. The results will display in a table.




Step 7If the device is valid, the table will show the device name, address and location. Click the Add Devices button to add it to the specified group. 



If you have any issues please contact the Frontier Team.




Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article