Updating Cellular Module Firmware

Created by Joey Janssen, Modified on Thu, 18 Aug 2022 at 03:11 PM by Joey Janssen



To upgrade the firmware on the cellular module you will need to navigate to the support.cgi page. This can be done by making a change to the address in the address bar. If you are accessing your device via IC2 from the Remote Web Admin feature, you’ll see something like this:
.ic.peplink.com/ra/remote/<SERIAL_NUMBER>/cgi-bin/MANGA/index.cgi




Step 1Open a web browser and visit for MAX routers: 192.168.50.1 and for Balance routers: 192.168.1.1 . 



 




Step 2: Login to the web admin using your login credentials. The default credentials are username "admin" password "admin" however the password may have been changed as the first time you login to the device it requires you to set a new password.


 



Step 3:  Changing the URL.



Step 3.1Locally on the device:


https://192.168.50.1/cgi-bin/MANGA/index.cgi /

(For MAX routers: 192.168.50.1 and for Balance routers: 192.168.1.1 would be the standard IP)


Step 3.2: Via Incontrol2:


.ic.peplink.com/ra/remote/<SERIAL_NUMBER>/cgi-bin/MANGA/index.cgi 

.ic.peplink.com/ra/remote/<SERIAL_NUMBER>/cgi-bin/MANGA/support.cgi 





Step 4: You'll need to find the Cellular Module Firmware Update




Step 4.1: Click on Check for Update 




You'll be able to update the Cellular module by selecting a module.



Step 4.2: Click Update or click Update all when you have a multiple Cellular router. See the screenshot below.






If you have any issues please contact the Frontier Team.




Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article